WLEN=Val_0x0
Receive Configuration Register 0
| WLEN | This bit field is used to program the desired data resolution of the receiver and enables the LSB of the incoming left (or right) word to be placed in the LSB of the I2S_LRBR0[LRBRX] (or I2S_RRBR0[RRBRX]) bit field. Programmed data resolution must be less than or equal to the I2S_COMP_PARAM_2[I2S_RX_WORDSIZE_x] bit field value, where x = 0 to 3. If the selected resolution is greater than the I2S_COMP_PARAM_2[I2S_RX_WORDSIZE_x] bit field value, the receive channel defaults back to the to the maximum audio data resolution supported. The channel must be disabled prior to any changes in this value (I2S_RER0[RXCHENX] = 0x0). 0 (Val_0x0): Ignore the word length 1 (Val_0x1): 12-bit data resolution of the receiver 2 (Val_0x2): 16-bit data resolution of the receiver 3 (Val_0x3): 20-bit data resolution of the receiver 4 (Val_0x4): 24-bit data resolution of the receiver 5 (Val_0x5): 32-bit data resolution of the receiver |